Tenda F3 router device setup

Tenda wifi router devices are very strong devices and Tenda F3 devices are especially very advance router devices. This article is especially dedicated to Tenda F3 device configurations. If you have a new Tenda router device then you will need to access Tenda router ip login page for settings up your device. if you do not have CD for setting up your new device then this official login address will help your to setup your device. 

Complete Steps for Settings Up your Tenda F3 Device

1.     Wired connections will be required between your Tenda F3 router and computer system. If you connect your devices using wired connections, you can easily configure your device even if you lost the setup CD.

2.     Now open web browser at same computer device and fill Tenda router ip login IP. Do not know about login IP? Simply fill 192.168.0.1 IP address to your address bar and then click on “Enter” button.

3.     For user name you can use “admin” and for password you can either try “admin” or do not fill any thing in password field and hit the enter key.

4.     Click on “WLAN Settings” button.

5.     After that click on “Basic Settings” tab.

6.     You will get the setup button and then fill network type for your device, network name for your Tenda F3 device, either enable of disable SSID for your device.

7.     Choose the operating mode for your device. Tenda router devices can work with different operating modes so choose your desired operating mode.

8.     Click on “apply” button.Time and remote management setting for tenda f3 router devices.

These are steps for settings up new Tenda F3 wifi router device when you do not have the setup CD for your device. you can then remove the LAN cable for your device and place your router to new place.